The Way to Successfully Jump Start One Car Using Another Car

Here is how you can successfully jump-start a car using a different car.

Get the cars close to each other, put them in park, then turn off the engine and open the hood. Once you can identify the plus and minus o the cables and battery, it's time to get to work. Place the red jumper cable first on the bad battery plus side. The other red cable goes to the plus on the good battery.

The black jumper cable goes first to the good battery, then you will take the remaining black cable and place it on any metal surface around the bad battery. Start the car; then after a minute, you can start the other. When it turns over, remove the jumper cables.

Visit us at Auto Express Fiat of Erie so the team can properly test the battery in your vehicle, so you will not have to worry about it again.

 

 

Categories: Service, News
cus
; ;